ZX10R Race Ready

[Ninja Master 10R]

The bike is ready, graphics will be on this coming weekend

[derf]

Nice stallion! Need to get mine ready.

[tojo92]

CMRA?

[Ninja Master 10R]

Yup, gonna try it this year and see what happens


---
I am here: http://maps.google.com/maps?ll=26.241653,-98.167715

[tojo92]

Yup, gonna try it this year and see what happens


---
I am here: http://maps.google.com/maps?ll=26.241653,-98.167715

Very cool. Good luck!

[fairing lurker]

Nice! Good luck and see you at the races! First time on MSR H next weekend with a bunch of new goodies to test out on my 10R. Should be interesting.

regards,

[-=sean)=-]

Cool! I thought this was a for sale thread at first glance. How did you get the race fairings to fit over stock exhaust, especially with part of the cat in the middle chamber? If you're going to race it, you'll want to at a minimum get a slip on to get rid of that mid section and beat out a portion of the honeycomb that's at the end of the header pipe, if the ZX-10R is similar to ZX-6R. That stuff overheats under racing conditions, melts, and begins to seal up the exhxaust. M4 GP slip-on would probably be best bang for the buck.

[Bryan]

I just bought this for my 2011 ZX10R. I have already gutted the Cat. Mid pip is next.


http://www.bikebandit.com/hot-bodies...LAID=824407421

[Ninja Master 10R]

Sean, the Rockwall skins were designed to fit that way, it's the reason i bought them, the only upgrades i've done is to the suspension and brakes. The pipe was my next project. I don't remember any honeycomb in that set anywhere, and i've been beating it pretty hard for a couple of years. I won't change anything until after i can put what it's got to good use, and definatley not until after all my licensing is done. Any little bit changes the way that thing handles and i want to stay out of the dirt if at all possible!

[TRU]

Hey man wanna use the high mount Muzzy slipon pipe I have on the 750... its getting an underslung pipe for the rat conversion

[Ninja Master 10R]

If I can make it fit, sure


---
I am here: http://maps.google.com/maps?ll=26.241649,-98.167655

[Ninja Master 10R]

This was a quick shot after the graphics are on and it's missing something. It's just too black, but i'm not sure what else i can toss on there. Ideas welcome, i'm going to put something on the front fender, and some more lettering on the tail.

[ZedX]

The JD looked better on the other bike. Somthing is missing. No clue what though...

[jessejgzz]

White rims and a white tail sect. with black letters on said tail sect..just do it...trust me...

[Ninja Master 10R]

I'd forgotten about the rims, i do need to get them powder coated white. I'll start there and then work on the tail, it may look right with the rims done. Thanke Jesse!

[i2fast4u]

POWER COAT THE RIMS WHITE WITH JACK DANIELS ON INSIDE LIP OF THE WHEEL, PUT OLD NO 7 LOGO WHERE THE RIGHT HEADLIGHT WOULD BE,

[Ninja Master 10R]

POWER COAT THE RIMS WHITE WITH JACK DANIELS ON INSIDE LIP OF THE WHEEL, PUT OLD NO 7 LOGO WHERE THE RIGHT HEADLIGHT WOULD BE,

I like both of those ideas, i think i will.

[Mr. PL]

Make only the underside of the tail white...from the body line down. Leave the top black for contrast. Maybe the same for the front fender?? White below the body line and leave the top black? (Just throwin out ideas.)

BTW...nice bike!

[VFRacer-R]

I didn't follow your answer to Seanzy too well, but even a gutted cat will burn through you lower. Even though they "fit" with the cat, the heat is incredible and it won't take long before your looking through a burned out hole in the lower.

Good luck!

P.S.
Isn't the tail going to be covered by a number plate anyway? Gonna lose a cool sticker!

[wrx_02]

I would have gone Black and gold but I guess I'm just classy like that.

Also if you need any vector logos drawn up just let me know. I do that kinda stuff all the time.

[Ninja Master 10R]

I didn't follow your answer to Seanzy too well, but even a gutted cat will burn through you lower. Even though they "fit" with the cat, the heat is incredible and it won't take long before your looking through a burned out hole!

I've actually had these skins on for two and a half years, no issues at all, otherwise I might agree.



---
I am here: http://maps.google.com/maps?ll=26.241527,-98.167683

[jakesnake]

Cool Bike Kasey have fun and be safe!